Inside The Recording Studio - Unlock remarkable tips and tricks for improved recordings in your studio. Unusually great for beginners and professionals.

May 20, 2022

Bass, EQ

New EQ Technique for Electric Bass: How to Boost and Cut with your Ears!

EQing Electric Bass Tracks

The electric bass may not always steal the spotlight, but it’s the glue that holds the entire mix together. Get it right, and your track feels powerful, steady, and alive. Get it wrong, and suddenly the song feels hollow, muddy, or out of balance. In this episode of Inside the Recording Studio, Chris and Jody explore the world of EQ for electric bass, breaking down the frequency spectrum and showing you how to shape your bass so it sits perfectly in the mix.

They start in the sub frequencies, where rumble lives. Do you want that deep foundation that rattles the room, or is it overwhelming the kick drum? Then they move into the fundamental low end—the meat of the bass tone. Too much here and things get boomy; too little and the track loses its weight.

From there, the guys tackle the low mids, often the “mud zone” where clarity disappears. You’ll learn how subtle cuts can clean up a mix without robbing the bass of warmth. The conversation then shifts to the upper mids, where definition and attack live—the frequencies that help your bass line be heard on smaller speakers. Finally, they touch on the surprisingly important role of air and high-end content, and why even bass tracks can benefit from a touch of sparkle.

Along the way, Chris and Jody don’t just talk numbers—they share their own workflow preferences, the reasons why you might cut in one track and boost in another, and how recording setup tips can make EQ decisions easier from the start.

And, of course, it wouldn’t be Inside the Recording Studio without some friendly banter, a dash of nonsense, and this week’s Friday Finds—spotlighting new tools and creative sparks for your studio sessions.

Whether you’re producing in a world-class room or experimenting with home studio gear, this episode gives you practical insights to make your bass sound full, tight, and mix-ready.

******************************

Gear we used:
Jody’s Mic & Voice Chain: Telefunken C12 – Groove Tubes Vipre – Apollo – UA Neve 1073 – UA LA2A – UA Studer A800
Jody’s Channel Strip: iZotope RX Spectral DeNoise – iZotope RX Mouth DeClick – UA Neve 1073 – UA LA2A – UA 1176E

Chris’ Mic & Voice Chain: Slate ML1 – Apollo – UA – Slate VMR (FG12, FG73, API Eq, SSL 4kE) – iZotope RX Voice – DeNoise
Chris’ Channel Strip: Eventide Precision Time Align – iZotope RX Spectral DeNoise – iZotope RX Mouth DeClick – UA Neve 1073 – UA LA2A – UA 1176E

Master: Oek Sound Soothe 2 – iZotope Ozone Imager – iZotope Ozone Maximize.

******************************

If you want to collaborate, sponsor a podcast, donate, or want us to review your product – contact us at: collaborate@insidetherecordingstudio.com
May 13, 2022

Microphones, Vocals

Vocal Mic Distance: How Close is Close Enough?

Tracking Vocals Like a Pro

When it comes to making a song connect, few things are more important than the vocal. But capturing a great vocal isn’t just about a good singer—it’s about technique, mic handling, and knowing the quirks that can make or break a performance. On this episode of Inside the Recording Studio, Chris and Jody dig into the practical (and sometimes overlooked) details of tracking vocals.

How close should you actually be to the mic? Too close and you risk plosives, boominess, and overwhelming proximity effect. Too far and the vocal loses intimacy, presence, and clarity. Chris and Jody talk through these issues and share recording setup tips to help you find the sweet spot for every singer and every song.

But what about the singers who insist on holding the mic in their hand? It might feel natural on stage, but in the studio it introduces handling noise, inconsistent distance, and a whole lot of headaches. The guys weigh the pros and cons, offering strategies for dealing with this common request without sacrificing quality.

And then there’s the proximity effect—a powerful tonal shift that happens as singers move closer to directional mics. Sometimes it’s a problem to manage, other times it’s a creative tool you can embrace. Chris and Jody explain how to recognize it, control it, and even use it to your advantage.

Along the way, you’ll get clear advice that applies whether you’re working with high-end gear or just starting out in a home studio gear setup. Expect to hear about the issues you run into when the basics aren’t right, practical fixes, and how to avoid wasting takes on problems that could have been solved before hitting record.

Of course, it wouldn’t be Inside the Recording Studio without a little Friday Finds, where Chris and Jody share cool tools, plugins, or resources to spark your creativity. And yes—some good-natured nonsense makes an appearance too.

By the end of this episode, you’ll know how to position singers for better recordings, how to avoid the most common tracking pitfalls, and how to make sure your vocal takes sit in the mix with authority.

******************************

Gear we used:
Jody’s Mic & Voice Chain: Telefunken C12 – Groove Tubes Vipre – Apollo – UA Neve 1073 – UA LA2A – UA Studer A800
Jody’s Channel Strip: iZotope RX Spectral DeNoise – iZotope RX Mouth DeClick – UA Neve 1073 – UA LA2A – UA 1176E

Chris’ Mic & Voice Chain: Slate ML1 – Apollo – UA – Slate VMR (FG12, FG73, API Eq, SSL 4kE) – iZotope RX Voice – DeNoise
Chris’ Channel Strip: Eventide Precision Time Align – iZotope RX Spectral DeNoise – iZotope RX Mouth DeClick – UA Neve 1073 – UA LA2A – UA 1176E

Master: Oek Sound Soothe 2 – iZotope Ozone Imager – iZotope Ozone Maximize.

******************************

If you want to collaborate, sponsor a podcast, donate, or want us to review your product – contact us at: collaborate@insidetherecordingstudio.com
May 6, 2022

EQ, Workflow

Audio Masking: All the Tools You Need to Avoid It

Understanding Audio Masking

Every mix has its battles. Instruments clash, frequencies collide, and sometimes the music you carefully crafted turns into a blur. That, friends, is audio masking—and it’s the silent mix killer. On this episode of Inside the Recording Studio, Chris and Jody wade into the muddy waters of masking, explaining what it is, why it happens, and most importantly, how to eliminate it.

So what exactly is audio masking? It’s when two instruments occupy the same frequency range and step on each other’s toes, leaving you with a mix that feels cluttered or flat. Chris and Jody break down the most common offenders: guitars and vocals battling for midrange real estate, bass and kick fighting in the low end, synths washing over everything with dense layers.

But this isn’t just a problem for pros in big studios—home studio gear setups are especially prone to masking since rooms and monitoring aren’t always perfect. The guys offer practical recording setup tips for identifying where masking is happening, and how to solve it with EQ moves, arrangement tweaks, or panning strategies.

You’ll also learn why simply making things louder isn’t the solution. Instead, Chris and Jody highlight the importance of listening critically and carving space so every instrument has its moment to shine. They share insight into software tools—like spectrum analyzers and visualizers—that can actually let you see masking in your mix, revealing hidden overlaps you might not catch by ear alone.

And of course, in true Inside the Recording Studio fashion, you’ll get their candid takes, a bit of nonsense, and the latest Friday Finds to inspire your next project.

By the end of this episode, you’ll know how to spot masking before it ruins your mix, how to fix it with confidence, and how to keep your productions sounding polished and professional.

******************************

Gear we used:
Jody’s Mic & Voice Chain: Telefunken C12 – Groove Tubes Vipre – Apollo – UA Neve 1073 – UA LA2A – UA Studer A800
Jody’s Channel Strip: iZotope RX Spectral DeNoise – iZotope RX Mouth DeClick – UA Neve 1073 – UA LA2A – UA 1176E

Chris’ Mic & Voice Chain: Slate ML1 – Apollo – UA – Slate VMR (FG12, FG73, API Eq, SSL 4kE) – iZotope RX Voice – DeNoise
Chris’ Channel Strip: Eventide Precision Time Align – iZotope RX Spectral DeNoise – iZotope RX Mouth DeClick – UA Neve 1073 – UA LA2A – UA 1176E

Master: Oek Sound Soothe 2 – iZotope Ozone Imager – iZotope Ozone Maximize.

******************************

If you want to collaborate, sponsor a podcast, donate, or want us to review your product – contact us at: collaborate@insidetherecordingstudio.com